Geodataset Name:       EPATRI_OSW
Geodataset Type:       SHAPEFILE
Geodataset Feature:    Point
Feature Count:         2074

DATA SOURCE(S):                    US Environmental Protection Agency
SCALE OF ORIGINAL SOURCE MAPS:     N/A
DATE OF AUTOMATION OF SOURCE:      20050511
GEODATASET EXTENT:                 STATE OF FLORIDA

FEATURE ATTRIBUTE TABLES:

Datafile Name: EPATRI_OSW.DBF

FEATURE ATTRIBUTE TABLES CODES AND VALUES:

Item	Item Description
OBJECTID	Internal feature number.
REPORT_YR	Reporting Year. The calendar year in which the reported activities occur.
TRD_SECIND	Trade Secret Indicator. Indicates whether the reporting facility claims the identity of the chemical or chemical category as a trade secret. Yes = Checked (Trade Secret) No = Not checked
TRIFID	Facility identification in the format zzzzz-nnnnn-sssss. NOTE: The contents of this field is not changed to match facility ownership, or zip code changes. Rather, the TRI Facility ID identifies a specific geographical location which is alos identified by the latitude and longitude of that location. zzzzz = Facility zip code nnnnn = First five consonants of the name sssss = First five non-special characters in the street address
FAC_NAME	Facility Name. Name of the reporting facility.
STREET	Facility Street. Street address of the reporting facility.
CITY	Facility City. City in which the reporting facility is located.
COUNTY	Facility County. County in which the reporting facility is located.
STATE	Facility State. Two-letter state code of the reporting facility.
ZIP	Facility Zip Code. Zip code of the reporting facility.
ENT_FACIND	Entire Facility Indicator. Indicates whether the information covers an entire facility or part of a facility. Yes = Entire No = Partial
PAR_FACIND	Partial Facility Indicator. Indicates whether the information covers an entire facility or part of a facility. Yes = Partial No = Entire
FEDERAL	Federal Facility Indicator. Code indicating whether a facility is Federal or not. Yes = Federal No = non-Federal or GOCO
GOCO	GOCO Facility Indicator. Code indicating whether a facility is GOCO (Government-Owned, Contractor-Operated) facility or not. Yes = GOCO No = non-GOCO
PRI_SICCOD	Primary SIC Code. Primary four-digit Standard Industrial Classification (SIC) Code.
SICCODE_2	SIC Code 2. Second four-digit Standard Industrial Classification (SIC) Code entered by facility.
SICCODE_3	SIC Code 3. Third four-digit Standard Industrial Classification (SIC) Code entered by facility.
SICCODE_4	Fourth four-digit Standard Industrial Classification (SIC) Code entered by facility.
SICCODE_5	SIC Code 5. Fifth four-digit Standard Industrial Classification (SIC) Code entered by facility.
SICCODE_6	SIC Code 6. Sixth four-digit Standard Industrial Classification (SIC) Code entered by facility.
LATITUDE	Reported latitude of the reporting facility converted into decimal degrees (Format: signed 2 digit whole number, 6 digit decimal positions +nn.nnnnnn).
LONGITUDE	Reported longitude of the reporting facility converted into decimal degrees. (Format: signed 3 digit whole number, 6 digit decimal positions -nnn.nnnnnn).
DUNS_A	D&B NR A. Unique identification number assigned by Dun and Bradstreet to the reporting facility.
DUNS_B	D&B NR B. Unique identification number assigned by Dun and Bradstreet to the reporting facility.
RCRA_NR_A	RCRA NR A. Twelve-digit alphanumeric identifier assigned by EPA under the Resource Conservation and Recovery Act.
RCRA_NR_B	Twelve-digit alphanumeric identifier assigned by EPA under the Resource Conservation and Recovery Act.
NPDES_NR_A	Nine-digit alphanumeric identifier assigned to a facility under EPA's National Pollutant Discharge Elimination System.
NPDES_NR_B	Nine-digit alphanumeric identifier assigned to a facility under EPA's National Pollutant Discharge Elimination System.
UIC_NR_A	Underground injection identification number, assigned by EPA or the state, to a facility which injects chemical wastes into class 1 deep wells.
UIC_NR_B	Underground injection identification number, assignedby EPA or the state, to a facility which injects chemical wastes into class 1 deep wells.
PARENT_CO	Parent Company Name. Name of the corporation or other business entity that owns or controls the reporting facility.
PARENT_DUN	Parent Company D&B Nr. Unique identification number assigned by Dun and Bradstreet to the parent company of the reporting facility.
DOC_CTRLNU	Document Control Number. Unique identification number assigned to each submission by EPA. Format: TTYYMMMNNNNNC. TT = Document type YY = Reporting year MMM = Document type NNNNN = Sequential number C = Check digit
CAS_NUMBER	Chemical Abstracts Service (CAS) Registry Number for that unique chemical, or category code (for compounds). NOTE: CAS number 9999999999 is for sanitized trade secret submissions; CHEM_NAME displays the reported generic chemical name.
CHEM_NAME	Chemical Name. Name of the chemical or generic name if the chemical is claimed as a trade secret.
CLASSIFICA	Classification. Indicates the classification of the chemical. Chemicals can be classified as either a Dioxin or Dioxin-like compound, a PBT (Persistent, Bioaccumulative and Toxic) chemical or a general EPCRA Section 313 chemical. Value: {TRI, PBT, DIOXIN} TRI = General EPCRA Section 313 Chemical PBT = Bioaccumulative and Toxic DIOXIN = Dioxin or Dioxin-like compound
UNIT	Unit of Measure. Indicates the unit of measure used to quantify the chemical. Pounds = Pounds Grams = Grams
DIOX_DIST1	Dioxin Distribution 1. Indicates the percentage of 1,2,3,4,6,7,8 Heptachlorodibenzofuran (CAS # 67562-39-4) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOX_DIST2	Dioxin Distribution 2. Indicates the percentage of 1,2,3,4,7,8,9 Heptachlorodibenzofuran (CAS # 55673-89-7) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOX_DIST3	Dioxin Distribution 3. Indicates the percentage of 1,2,3,4,7,8 Hexachlorodibenzofuran (CAS # 70648-26-9) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOX_DIST4	Dioxin Distribution 4. Indicates the percentage of 1,2,3,6,7,8 Hexachlorodibenzofuran (CAS # 5717-44-9) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOX_DIST5	Indicates the percentage of 1,2,3,7,8,9 Hexachlorodibenzofuran (CAS # 72918-21-9) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOX_DIST6	Dioxin Distribution 6. Indicates the percentage of 2,3,4,6,7,8 Hexachlorodibenzofuran (CAS # 60851-34-5) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOX_DIST7	Dioxin Distribution 7. Indicates the percentage of 1,2,3,4,7,8 Hexachlorodibenzo- p-dioxin (CAS # 39227-28-6) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOX_DIST8	Dioxin Distribution 8. Indicates the percentage of 1,2,3,6,7,8 Hexachlorodibenzo- p-dioxin (CAS # 5765385-7) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOX_DIST9	Dioxin Distribution 9. Indicates the percentage of 1,2,3,7,8,9 Hexachlorodibenzo- p-dioxin (CAS # 19408-74-3) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOXDIST10	Dioxin Distribution 10. Indicates the percentage of 1,2,3,4,6,7,8 Heptachlorodibenzo- p-dioxin (CAS # 35822-46-9) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOXDIST11	Dioxin Distribution 11. Indicates the percentage of 1,2,3,4,6,7,8,9 Octachlorodibenzofuran (CAS # 39001-02-0) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOXDIST12	Dioxin Distribution 12. Indicates the percentage of 1,2,3,4,6,7,8,9 Octachlorodibenzo- p-dioxin (CAS # 03268-87-9) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOXDIST13	Dioxin Distribution 13. Indicates the percentage of 1,2,3,7,8 Pentachlorodibenzofuran (CAS # 57117-41-6) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOXDIST14	Dioxin Distribution 14. Indicates the percentage of 2,3,4,7,8 Pentachlorodibenzofuran (CAS # 57117-31-4) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOXDIST15	Dioxin Distribution 15. Indicates the percentage of 1,2,3,7,8 Pentachlorodibenzo- p-dioxin (CAS # 40321-76-4) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOXDIST16	Dioxin Distribution 16. Indicates the percentage of 2,3,7,8 Tetrachlorodibenzofuran (CAS # 51207-31-9) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
DIOXDIST17	Dioxin Distribution 17. Indicates the percentage of 2,3,7,8 Tetrachlorodibenzo- p-dioxin (CAS # 01746-01-6) in the reported Dioxin or Dioxin-like compound. Values are either 0 or a number between 0.01 and 100 (inclusive).
ST1_WASCO	Stream 1 - Waste Stream Code. This field provides the indicator that shows the type of general waste stream containing the reported chemical that is being treated. A = gaseous W = Wastewater L = Liquid Waste S = Solid Waste
ST1_TRSEQ1	Stream 1 - Treatment Method - Sequence 1. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST1_TRSEQ2	Stream 1 - Treatment Method - Sequence 2. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST1_TRSEQ3	Stream 1 - Treatment Method - Sequence 3. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST1_TRSEQ4	Stream 1 - Treatment Method - Sequence 4. Code corresponding to the treatment method used on waste stream containing the reported chemical regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST1_TRSEQ5	Stream 1 - Treatment Method - Sequence 5. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST1_TRSEQ6	Stream 1 - Treatment Method - Sequence 6. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST1_TRSEQ7	Stream 1 - Treatment Method - Sequence 7. Code corresponding to the treatment method used on waste stream containing the reported chemical regardless of whether teh waste treatment method actually removes the specific chemical being reported.
ST1_TRSEQ8	Stream 1 - Treatment Method - Sequence 8. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST1_RAINCO	Stream 1 - Range Influent Concentration. Code corresponding to the range concentration of the toxic chemical as it typically enters the specified waste treatment step or sequence.
ST1_TREST	Stream 1 - Treatment Efficiency Estimate. Estimate of the percentage of the toxic chemical removed from the waste stream through destruction, biological degradation, chemical conversion, or physical removal of the chemical from the wastestream being treated.
ST1_OPERDA	Stream 1 - Based on Operating Data? Indicates that the information given in the EFFICIENCY field is based on operating data. Yes = EFFICIENCY field based on operating data. No = EFFICIENCY field not based on operating data.
ST2_WASCO	Stream 2 - Waste Stream Code. The indicator that shows the type of general waste stream containing the reported chemical that is being treated. A = Gaseous W = Wastewater L = Liquid waste S = Solid waste
ST2_TRSEQ1	Stream 2 - Treatment Method - Sequence 1. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST2_TRSEQ2	Stream 2 - Treatment Method - Sequence 2. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST2_TRSEQ3	Stream 2 - Treatment Method - Sequence 3. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST2_TRSEQ4	Stream 2 - Treatment Method - Sequence 4. Code corresponding to the treatment method used on waste stream containing the reported chemical regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST2_TRSEQ5	Stream 2 - Treatment Method - Sequence 5. Code corresponding to the treatment method used on waste stream containing the reported chemical regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST2_TRSEQ6	Stream 2 - Treatment Method - Sequence 6. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST2_TRSEQ7	Stream 2 - Treatment Method - Sequence 7. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST2_TRSEQ8	Stream 2 - Treatment Method - Sequence 8. Code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST2_RAINCO	Stream 2 - Range Influent Concentration. Code corresponding to the range concentration of the toxic chemical as it typically enters the specified waste treatment step or sequence.
ST2_TREST	Stream 2 - Treatment Efficiency Estimate. The estimate of the percentage of the toxic chemical removed from the waste stream through destruction, biological degradation, chemical conversion, or physical removal of the chemical from the wastestream being treated.
ST2_OPERDA	Stream 2 - Based on Operating Data? This field indicates that the information given in the EFFICIENCY field is based on operating data. Yes = EFFICIENCY field is based on operating data. No = EFFICIENCY field is not based on operating data.
ST3_WASCO	Stream 3 - Waste Stream Code. Provides the indicator that shows the type of general waste stream containing the reported chemical that is being treated. A = Gaseous W = Wastewater L = Liquid waste S = Solid waste
ST3_TRSEQ1	Stream 3 - Treatment Method - Sequence 1. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST3_TRSEQ2	Stream 3 - Treatment Method - Sequence 2. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST3_TRSEQ3	Stream 3 - Treatment Method - Sequence 3. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST3_TRSEQ4	Stream 3 - Treatment Method - Sequence 4. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST3_TRSEQ5	Stream 3 - Treatment Method - Sequence 5. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST3_TRSEQ6	Stream 3 - Treatment Method - Sequence 6. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST3_TRSEQ7	Stream 3 - Treatment Method - Sequence 7. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST3_RAINCO	Stream 3 - Range Influent Concentration. Provides the code corresponding to the range concentration of toxic chemical as it typically enters the specified waste treatment step or sequence.
ST3_TREST	Stream 3 - Treatment Efficiency Estimate. Provides the estimate of the percentage of the toxic chemical removed from the waste stream through destruction, biological degradation, chemical conversion, or physical removal of the chemical from the wastestream being treated.
ST3_OPERDA	Stream 3 - Based on Operating Data? Indicates that the information given in the EFFICIENCY field is based on operating data. Yes = EFFICIENCY field is based on operating data. No = EFFICIENCY field is not based on operating data.
ST4_WASCO	Stream 4 - Waste Stream Code. Provides the indicator that shows the type of general waste stream containing the reported chemical that is being treated. A = Gaseous W = Wastewater L = Liquid waste S = Solid waste
ST4_TRSEQ1	Stream 4 - Treatment Method - Sequence 1. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST4_TRSEQ2	Stream 4 - Treatment Method - Sequence 2. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST4_TRSEQ3	Stream 4 - Treatment Method - Sequence 3. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardlss of whether the waste treatment method actually removes the specific chemical being reported.
ST4_TRSEQ4	Strem 4 - Treatment Method - Sequence 4. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment methos actually removes the specific chemical being reported.
ST4_TRSEQ5	Stream 4 - Treatment Method - Sequence 5. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST4_TRSEQ6	Stream 4 - Treatment Method - Sequence 6. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST4_RAINCO	Stream 4 - Range Influent Concentration. Provides the code corresponding to the range concentration of the toxic chemical as it typically enters the specified waste treatment step or sequence.
ST4_TREST	Stream 4 - Treatment Efficiency Estimate. Provides the estimate of the percentage of the toxic chemical removed from the waste stream through destruction, biological degradation, chemical conversion, or physical removal of the chemical from the wastestream being treated.
ST4_OPERDA	Stream 4 - Based on Operating Data? Indicates that the information given in the EFFICIENCY field is based on operating data. Yes = EFFICIENCY field based on operating data. No = EFFICIENCY field not based on operating data.
ST5_WASCO	Stream 5 - Waste Stream Code. Provides the indicator that shows the type of general waste stream containing the reported chemical that is being treated. A = Gaseous W = Wastewater L = Liquid Waste S = Solid Waste
ST5_TRSEQ1	Stream 5 - Treatment Method - Sequence 1. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST5_TRSEQ2	Stream 5 - Treatment Method - Sequence 2. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST5_TRSEQ3	Stream 5 - Treatment Method - Sequence 3. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST5_TRSEQ4	Stream 5 - Treatment Method - Sequence 4. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST5_TRSEQ5	Stream 5 - Treatment Method - Sequence 5. Provides the code corresponding to the treatment method used on waste stream containing the reported chemical, regardless of whether the waste treatment method actually removes the specific chemical being reported.
ST5_RAINCO	Stream 5 - Range Influent Concentration. Provides the code corresponding to the range concentration of the toxic chemical as it typically enters the specified waste treatement step or sequence.
ST5_TREST	Stream 5 - Treatment Efficiency Estimate. Provides the estimate of the percentage of the toxic chemical removed from the waste stream through destruction, biological degradation, chemical conversion, or physical removal of the chemical from the wastestream being treated.
ST5_OPERDA	Stream 5 - Based on Operating Data? Yes = EFFICIENCY field is based on operating data. No = EFFICIENCY field is not based on operating data.
FGDLAQDATE	The date FGDL received the data (i.e. downloaded, etc.)
DESCRIPT	FGDL added item based on TRIFID.
SHAPE	Feature geometry.
AUTOID	Unique ID added by GeoPlan

USER NOTES:

This data is provided 'as is'. GeoPlan relied on the integrity of the original data layer's topology

The data in this file is a reconciliation of all the data the TRI program has collected from a facility over the course of its participation in the TRI program. Most facilities have sent in several chemical reports (form Rs and As) each year, for a number of years. When the data is collected at the TRI Data Processing Center, differences from form to form and year to year are identified, researched and reconciled. The result is a database of facility identification information that is consist and up to date. Some of the data that appears in this file is not a result of facility reconciliation. The Title of the Certifying Official, Certifying Official s Name, Entire Facility Ind, Partial_Facility_Ind, Federal Facility Ind, GOCO Facility Ind and the SIC codes are all taken from the last active and valid form the facility submitted. All other data is the result of the reconcilation process.

GeoPlan relied on the integrity of the attribute information within the original data.

The Toxics Release Inventory (TRI) is a database containing detailed information on nearly 650 chemicals and chemical categories that over 23,000 industrial and federal facilities manage through disposal or other releases, and waste management for recycling, energy recovery, or treatment. This inventory was established under the Emergency Planning and Community Right-to-Know Act of 1986 (EPCRA) and expanded by the Pollution Prevention Act of 1990. For Reporting Year 2003, 23,811 facilities reported to EPA s TRI Program. These facilities reported 4.44 billion pounds of on-site and off-site disposal or other releases of the almost 650 toxic chemicals. Over 88 percent of the total was disposed of or otherwise released on-site; almost 12 percent was sent off-site for disposal or other releases.

This data is provided 'as is' and its horizontal positional accuracy has not been verified by GeoPlan

This data is provided 'as is' and its vertical positional accuracy has not been verified by GeoPlan

THE DATA INCLUDED IN FGDL ARE 'AS IS' AND SHOULD NOT BE CONSTRUED AS LEGALLY BINDING. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED AS A RESULT OF USING, MODIFYING, CONTRIBUTING OR DISTRIBUTING THE MATERIALS. A note about data scale: Scale is an important factor in data usage. Certain scale datasets are not suitable for some project, analysis, or modeling purposes. Please be sure you are using the best available data. 1:24000 scale datasets are recommended for projects that are at the county level. 1:24000 data should NOT be used for high accuracy base mapping such as property parcel boundaries. 1:100000 scale datasets are recommended for projects that are at the multi-county or regional level. 1:125000 scale datasets are recommended for projects that are at the regional or state level or larger. Vector datasets with no defined scale or accuracy should be considered suspect. Make sure you are familiar with your data before using it for projects or analysis. Every effort has been made to supply the user with data documentation. For additional information, see the References section and the Data Source Contact section of this documentation. For more information regarding scale and accuracy, see our webpage at: http://geoplan.ufl.edu/education.html

REFERENCES:

Toxic Release Inventory Program (2003 TRI Data Release) http://www.epa.gov/tri/tridata/tri03/index.htm Environmental Protection Agency www.epa.gov 2003 TRI Public Data Release eReport http://www.epa.gov/tri/tridata/tri03/2003eReport.pdf

DATA LINEAGE SUMMARY:

Data originally released by the U.S. Environmental Protection Agency in May 2005. When GeoPlan received the dataset it was in tab delimited format. The original data was limited to the state of Florida. Process Date: 20051216 Data was downloaded from US Environmental Protection Agency website in text format to GeoPlan in October 2005. GeoPlan, during the QA/QC process included the following aspects: (1) Projected data to FGDL Albers. (2) Deleted points which plotted outside of the physical State of Florida. (3) Deleted the fields: STREAM 3-TRTMT METHOD-SEQUENCE 8, STREAM 4-TRMT METHOD-SEQUENCE 7, STREAM 4-TREATMENT METHOD-SEQUENCE 8, STREAM 5-TREATMENTMETHOD-SEQUENCE 7, STREAM 5-TREATMENT METHOD-SEQUENCE 6, UIC NR B (4) Added the FGDLAQDATE field. (5) Added DESCRIPT item based on TRIFID. Process Date: 20051216

MAP PROJECTION PARAMETERS:

Projection                          ALBERS
Datum                               HPGN
Units                               METERS
Spheroid                            GRS1980
1st Standard Parallel               24  0  0.000
2nd Standard Parallel               31 30  0.000
Central Meridian                   -84 00  0.000
Latitude of Projection's Origin     24  0  0.000
False Easting (meters)              400000.00000
False Northing (meters)             0.00000

DATA SOURCE CONTACT (S):

Name:
Abbr. Name:
Address:


Phone:

Web site:
E-mail:
Contact Person:
         Phone:
        E-mail:

US Environmental Protection Agency
EPA
Air Toxics Assessment & Implementation Section
Atlanta, GA
30303



http://www.epa.gov/tri/tridata/tri03/data/index.htm
velez.ezequiel@epa.gov
Ezequiel Velez

Name:                   FLORIDA GEOGRAPHIC DATA LIBRARY
Abbr. Name:             FGDL
Address:                Florida Geographic Data Library
                        431 Architecture Building
                        PO Box 115706
                        Gainesville, FL  32611-5706
Web site:               http://www.fgdl.org

Contact FGDL: 

      Technical Support:	        http://www.fgdl.org/fgdlfeed.html
      FGDL Frequently Asked Questions:  http://www.fgdl.org/fgdlfaq.html
      FGDL Mailing Lists:		http://www.fgdl.org/fgdl-l.html
      For FGDL Software:                http://www.fgdl.org/software.html